Aussie Brewmakers
Generic filters
Exact matches only

AlcoEngine Lid and Pot Still Combo


This combo includes a Distillation Boiler lid that will fit a Turbo Boiler, Grainfather or Robobrew along with an AlcoEngine pot still.

Out of stock

Unit: Each SKU: 60590 Category:


Note – Please contact us prior to ordering to ensure stock availability

This combo includes a Distillation Boiler lid that will fit a Turbo Boiler, Grainfather or Robobrew along with an AlcoEngine pot still.

About the AlcoEngine Pot Still:

A pure pot still is used when you want the flavour of the wash to come through. For instance, if you ferment fruit or grains, it will allow some of that flavour to enter your distillate. If you use a reflux still, you would just end up with pure, unflavoured vodka. Inject some flavour into your drinks with the AlcoEngine Distilling Pot Still!

Fast 4.5L/hr with alcohol or 2.8L/hr with water

With an all copper construction for smoothness of taste it comes with a digital thermometer and is simple to use.

Just switch it on and collect your alcohol it couldn;t be simpler than that!

No more stuffing around with water flow speed!

Some stills are hard to opperate and require fine tuning of the water flow in the condenser. This Alcoengine Design on the other hand just requires a minimum water flow rate and thats it. So the as long as you have enough coolent it doesnt matter how fast your coolent flows through the still. This makes the still far easier to opperate than many other brands.

Solid Copper

Unlike stainless steel stills and stills that are only copper plated, this still is made from solid copper. When your hot spirit comes in contact with copper the copper acts like a catalytic converter and drives sulfur out of the spirit. This process means you get less off-flavours and you simply get better quality spirit. Copper is an expensive metal now and it definitely increases the cost of the still manufacture but we can say for sure that there is a very good reason why it still the preferred material by many serious distillers simply because the results are superior. Don’t listen to other people tell you that stainless is the best. There is no substitute for copper and a still like this will last you a lifetime.

Simple Assembly and Setup

This still is mostly assembled but you still have to connect your garden hose and coolant supply. You can just use your garden hose but it a bit of a waste of tap water so we recommend that you get a tank at least 500 liters in size then use a powerful recirculation pump to drive the still. We would recommend the Ozito 350watt pump that you can get from bunnings and you can purchase this separately yourself. We wouldn’t recommend a pump too small as you need a reasonably powerful pump to push the water through the condencer as there is a lot of flow restriction in the condenser head. When you get the still you just need some teflon tape and just attach the fittings. Please make sure you connect all the fittings and check for leaks before you start distilling. There is nothing worse that trying to attach a fitting once the still has heated up.


Lead free brass

Lead free silver soldering

High quality manufacture

Super easy to use and will produce high quality spirit

Australian Design

Please Note: Boiler, Grainfather or Robobrew not included. You must not attach a boiler or other system used as a boiler that is larger than 5L, as you legally need a capacity of less than 5L in Australia. You must obtain a license before using this product for making alcohol.

My Account



A password will be sent to your email address.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Shopping Cart
There are no products in the cart!
Continue Shopping