Home Brew Supplies
Aussie Brewmakers
Aussie Brewmakers
Menu

Closed Loop Transfer Kit – Oxygen Free Transfer

$39.95

Don’t oxidise your beer when kegging use this Closed Loop Transfer Kit and never degrade your beer post fermentation ever again!

Unit: Each SKU: 22595 Categories: ,

Description

Don’t oxidise your beer when kegging – use this Closed Loop Transfer Kit and never degrade your beer post fermentation ever again!

One of the most common issues we see with our kegging customers is oxidised beer. This typically occurs during transfer from the fermenter to keg through an open keg lid. The result is often a wet cardboard tasting finished product or a significant decline in hop aroma and flavour.

This Closed Loop Transfer Kit is suitable for just about any fermenter that has an airlock and a tap. It will work perfectly with standard 30L Plastic fermenters as well as higher end fermenters such as Grainfather Conicals.

The Closed Loop Transfer Kit will transfer your fermented beer to your keg while expelling C02 from your keg back into the top of your fermenter – complete oxygen free transfer.

The kit is made with push in fittings for ease of cleaning / drying after use.

Please Note: If you are concerned about blocking your keg liquid post poppet valve with hop material during transfer we recommend putting a MacDaddy Bouncer Filter in the middle of the 12.5mm ID Tube that connects to the fermenter tap. The MacDaddy Filter can be found HERE

The kit includes:

Liquid Side Assembly
  • 30cm 12.5mm ID Brewing hose – to go over the fermenter tap
  • An adaptor to reduce the brewing hose to 5mm ID / 8mm OD Beer Line (13mm Barb to 1/2” BSP Female with a 1/2” BSP Male to 8mm Montight Push in Fitting)
  • 1m of 5mm ID / 8MM OD Beer line
  • Ball Lock Liquid MFL Disconnect fitted with a Duotight 8mm to MFL fitting
Gas Side Assembly
  • 1.5m of 5mm ID / 8MM OD Beer line
  • Ball Lock Gas MFL Disconnect fitted with a Duotight 8mm to MFL fitting
To use:
  1. Clean, sanitise and purge your ball lock keg with C02. Release the keg C02 head pressure via the pressure relief valve on the lid
  2. Attach the Liquid Side Assembly to the fermenter tap and the liquid ball lock post on the keg
  3. Attach the Gas Side Assembly to the gas liquid ball lock post on your keg
  4. Remove your airlock and insert the end of the gas line from the keg into the grommet
  5. Open the fermenter tap to commence the closed transfer
  6. Once transfer is completed disassemble the Liquid Side Assembly and clean, sterilise and air dry thoroughly

My Account

Login

Register

A password will be sent to your email address.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Closed Loop Transfer Kit - Oxygen Free Transfer
Closed Loop Transfer Kit – Oxygen Free Transfer
$39.95
Shopping Cart
There are no products in the cart!
Continue Shopping
0