Duotight 8mm Push In Fitting to MFL
$3.95Duotight 8mm Push In Fitting to MFL
Looking for a high quality push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.
Showing 1–16 of 28 results
-
-
Duotight 8mm (5/16) Push In to 5/8″ to suit Keg Couplers and Tap Shanks
$3.95Duotight 8mm (5/16) Push In to 5/8″ to suit Keg Couplers and Tap Shanks
This straight joiner is suitable for Beer & Gas hosing with an 8mm outer diameter (4mm & 5mm internal diameter).
-
Duotight 6.5mm (1/4″) x 8mm (5/16″) Push In Reducer
$3.95Duotight 6.5mm (1/4″) x 8mm (5/16″) Push In Reducer
This reducer is suitable for Beer and  Gas hosing in 8mm (3/8) OD line to 6.5mm (1/4) OD Hosing. Ideal for pluto guns and font shanks with 6.5mm push in compatible barbs. No clamps necessary!
-
1/4 Nylon Flare Washer Olive for MFL Fittings
$0.401/4 Nylon Flare Washer Olive for MFL Fittings
The 1/4 Nylon Flare Washer Olive is an essential component designed to ensure leak – free connections for MFL fittings. It is particularly useful when dealing with stainless steel metal – on – metal fittings, where wear or damage can compromise the seal. By creating a tight, reliable seal, this washer prevents gas or liquid leaks, making it a crucial accessory for any dispensing or brewing system.
-
8mm MFL to 1/2″ BSP Fitting
$4.95These 8mm MFL push in fittings will screw right into any 1/2 inch BSP thread and allow you to push any 8mm beer or gas line directly into the fitting.
-
8mm MFL to 1/4″ BSP Fitting
$4.958mm MFL to 1/4″ BSP Fitting
Can be used instead of the barb as a push in fitting for the MKII regulators or as a push fitting on manifolds.
8mm MFL to 1/4″ BSP is also perfect for use with a short length of silicon hose to attach beer line to a fermenter tap for racking and gravity keg filling. Can be stainless steel or plastic.
-
Duotight Ball Valve Push In 8mm O/D
$3.95Duotight Ball Valve Push In 8mm O/D
This ball valve is suitable for use with 8mm external diameter beer and gas line.No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal.
-
Duotight 8mm Push In Joiner
$4.50Duotight 8mm Push In Joiner
This straight joiner is suitable for Beer & Gas hosing in 4mm ID & 5mm ID line or most lines with an 8mm outer diameter. Please note it will not fit the 10mm OD line (with 6mm ID).No clamps necessary!
-
Stainless Steel Tee Barb 6mm (1/4 inch)
$4.50Stainless Steel Tee Barb 6mm (1/4 inch)
These stainless fittings are machined from 304 stainless steel. The stainless tee; piece is made to fit 4mm – 6mm ID beer line.
-
Duotight 8mm (5/16) Push In Tee Piece
$3.95Duotight 8mm (5/16) Push In Tee Piece
This Tee Piece is suitable for Beer & Gas line with an 8mm external diameter (i.e. 4mm and 5mm ID). Please note, this fitting will not work with 10mm OD EVABarrier line (with 6mm ID).
-
Duotight Check Valve Push In 8mm O/D
$4.50Duotight Check Valve Push In 8mm O/D
This very handy fitting could save your expensive regulator from being ruined due to beer or other liquids back flowing up your gas line in a depressurisation event. This particular type of check valve has low opening pressure of only 1psi.
-
Beer / Keg Line Clamp 5mm
$1.00Beer / Keg Line Clamp 5mm
Stainless Steel Steples Clamp used to fasten beer and gas lines to the tail piece
Suits 7-8mm outside diameter beer hose (5 and 6mm inside diameter)
Stepless Clamp Tool recommended which is available separately. Alternatively, needle nose pliers will do the job.
Many home brewers use worm drive hose clamps that can be handy because they can be re-used however worm drive hose clamps simply dont work that well on beer line. The worm drive tends to pinch the line on one side causing the hose to leak or de-rates the pressure holding capacity of your system. These stepless clamps are significantly better because they form even compression around the whole diamater of the line. This makes a much better and more reliable connection.
-
Tube Cutter 2 in 1
$3.50Tube Cutter 2 in 1
This 2 in 1 tube cutter has two functions. The reverse of the tube cutter has an 8mm jaw that can be used to pull the collet back on the various Duotight or push in fittings that we sell.
-
EVA Barrier 4mm ID x 8mm OD Double Wall EVA Beer / Gas Line
$3.50EVA Barrier 4mm ID x 8mm OD Double Wall EVA Beer / Gas Line
This high quality beer line will keep your previous beverage in it’s best possible conditoin in the process.
-
EVA Barrier 5mm ID x 8mm OD Double Wall EVA Beer / Gas Line
$3.50EVA Barrier 5mm ID x 8mm OD Double Wall EVA Beer / Gas Line
This new EVA Double walled 5mm ID / 8mm OD tubing is made with an EVA outer wall and also an inner proprietary polymer barrier.
-
EVA Barrier 6mm ID x 9.5mm OD Double Wall EVA Beer / Gas Line
$3.50EVA Barrier 6mm x 9.5mm Double Wall EVA Beer / Gas Line
This new EVA Double walled 6mm ID / 9.5mm OD tubing is made with an EVA outter wall and also an inner proprietary polymer barrier.
End of content
End of content
Quality Beer & Gas line, MFL and Barbed Fittings, Silicon Brewing Hose, Tubing Fittings and Accessories
