‘Smoke on the Water’ Rauchbier Recipe Instructions
July 7, 2025Ingredients:
This recipe is available as an Aussie Brewmakers Recipe Kit, order no. 19812
This recipe kit is our version of a Bamberg style German Smoked Beer (Rauchbier). If you like a bit of bacon and you like beer then this is the recipe kit for you! A full flavoured beer with Beechwood smoked German malt overtones combined with moderate use of noble German hops gives this beer its distinctive flavour. This recipe is another great introduction to experimenting with hops, steeping grains and wet malts for the beginner or intermediate brewer who wants to take their tin kit brewing to the next level.
Supplied Kit Ingredients:
- 1 x 1.7kg Thomas Coopers Series Golden Crown Lager (Beer Kit)
- 1 x 1.5kg Briess CBW Goldpils Vienna Liquid Malt Extract (Malt Tin)
- 1 x 200g Dextrose
- 1 x 270g Cracked Rauchbier Grain Pack (Steeping Grains)
- 1 x 12g Hersbrucker Finishing Hops (steeped)
- 2 x 12g Hallertau Finishing Hops (steeped)
- 1 x 10g Mangrove Jack’s Craft Series M54 Californian Lager Yeast (Warm Ferment Lager Yeast)
Other Ingredients:
- 200g of Dextrose if kegging with no secondary fermentation or bottle conditioning
Method:
- Clean / sterilize all equipment including fermenter, paddle, saucepan and jug (used for steeping)
- Discard Beer Kit tin yeast and sit beer tin along with the Malt Tin in hot water for 10 minutes
- Boil 1.5L of water in a saucepan on the stove. Once boiled turn heat off
- Steep 270g Cracked Rauchbier Grain, 1 x 12g of Hersbrucker Hops and 2 x 12g of Hallertau Hops in the saucepan for 20 minutes
- Boil 1.5L of water in kettle
- Add 1.0L of boiled water to fermenter
- Add Beer Kit and Malt Tin along with 200g Dextrose to fermenter and stir to thoroughly dissolve
- Pour 250ml of boiled water into the Beer Kit Tin and 250ml into the Malt Tin and stir to dissolve remaining contents, then add both to the fermenter
- Strain the steeped Rauchbier Grains, and Hops into fermenter (do not add grain or hops to fermenter) and rinse with 500mls cold water
- Add cold water to fermenter to 22.5 ltrs and test temperature – make sure it is between 18-20 degrees before pitching yeast
- Take initial hydrometer reading
- Pitch 10g Mangrove Jack’s Craft Series M54 Californian Lager Yeast and stir gently
- Ferment between 18-20 degrees (optimal) for duration of fermentation. After fermentation activity has nearly ceased raise temperature by 2 degrees if possible for 48 hours (Diacetyl rest).
- When fermentation is finished check with hydrometer and bottle as per normal.
N.B. If kegging, add 200g of Dextrose at step 7

