High Country Hefeweizen Recipe Kit – FREE FREIGHT Australia Wide
$68.95
High Country Hefeweizen Recipe Kit – FREE FREIGHT Australia Wide
A Hefeweizen – style beer.
This recipe is another great introduction to experimenting with hops and wet malts for the beginner or tin kit brewer.
13 in stock
Description
High Country Hefeweizen Recipe Kit – FREE FREIGHT Australia Wide
Note: Please read the conditions/terms located at the bottom of this listing related to the free freight offer for this item prior to purchasing
High Country Hefeweizen Recipe Kit
This recipe is an Aussie Brewmakers ‘take’ at a Hefeweizen style beer. This recipe is another great introduction to experimenting with hops and wet malts for the beginner or ‘tin kit’ brewer.
Hefeweizen is a German / Bavarian wheat style beer that literally means ‘white beer’. It’s unique suspension and flavour results from the strain of yeast.
Fermentation temperatures are very important for this recipe and if followed as per the below will give good results.
Supplied Kit Ingredients:
- 1.7kg Morgan’s Premium Golden Sheaf Wheat Beer Kit
- 1.5kg Coopers Wheat Malt Extract Tin
- M20 Bavarian Wheat Yeast
- 12g Hallertau Finishing Hops – Dry Hopped
Other Ingredients:
- 200g of Dextrose if kegging with no secondary fermentation (not supplied)
Method:
- Clean / sterilize all equipment including fermenter and paddle
- Discard Morgan’s Golden Sheaf Wheat Beer tin yeast and sit tin along with the 1.5kg Coopers Wheat Malt Extract Tin in hot water for 10 minutes
- Boil 2.0ltrs of water in kettle
- Add 1.5ltrs of boiled water to wort
- Add both the Morgan’s Golden Sheaf Wheat Beer tin and the 1.5kg Coopers Wheat Malt Extract Tin to wort and stir thoroughly to dissolve
- Pour 250mls of boiled water into each tin and stir then add to wort
- Add water to wort to 22.0 ltrs and test temperature – make sure it is between 18-24 degrees before pitching yeast
- Take initial hydrometer reading
- Add Hallertau Finishing Hops bag to wort (dry hop)
- Pitch MJ’s M20 Bavarian Wheat yeast and stir gently
- Keep fermentation temperature lower than 24 degrees for the duration of the fermentation. Ideal fermentation temperature is 20-22 degrees
- When fermentation finished check with hydrometer and bottle as per normal.
N.B. If kegging, add 200g of Dextrose at step 5
T&C: Please note: Aussie Brewmakers offers free freight on Beer Extract Kits for delivery anywhere in Australia. Please select the ‘Free Shipping’ Freight Option during checkout. The free freight applies only to Beer Extract Kits that are ordered by themselves. In the event additional products are added to the order with a Beer Extract Kit then freight will be applied. If you would like clarification on the free freight structure please contact the team at Aussie Brewmakers.
Please note: Aussie Brewmakers reserves the right to select the freight provider for free freight promotions based off the delivery location and speed of delivery / freight cost.
Additional information
Weight | 10 g |
---|---|
Dimensions | 50 × 50 × 50 mm |
Unit |
Related products
-
Fat Yak Clone ‘1/2 Yak’ Recipe Kit – FREE FREIGHT Australia Wide
0 out of 5$71.95 Add to cart -
Balter XPA Style Recipe Kit – FREE FREIGHT Australia Wide
0 out of 5$86.95 Add to cart -
One Fin Single Fin Clone Summer Ale Recipe Kit – FREE FREIGHT Australia Wide
0 out of 5$86.95 Add to cart -
Red Sails in the Sunset – Red IPA Recipe Kit – FREE FREIGHT Australia Wide
0 out of 5$107.75 Add to cart
Reviews
There are no reviews yet