Little Creatures Bright Ale Clone Recipe Kit – FREE FREIGHT Australia Wide

Note:  Please read the conditions/terms located at the bottom of this listing related to the free freight offer for this item prior to purchasing.

This recipe is an Aussie Brewmakers ‘take’ on the Little Creatures Bright Ale.

This English style pale ale has a subtle maltiness balanced with woody and floral hop overtones. It has minimal bittering and is a great choice as a session beer. If you like the Little Creatures commercial offering then this kit will produce a bright ale in the same style and will be sure to please. This recipe is another great introduction to experimenting with hops, wet malts and steeping grains for the beginner or ‘tin kit’ brewer.

Supplied Kit Ingredients:

• 1 x 1.7kg Black Rock Pale Ale Beer Kit
• 1 x 1.5kg Briess CBW Pilsen Light LME OR 1.0kg Briess Pilsen Light Dried Malt Extract (depending on availability)
• 1 x 250g Light Dried Malt Extract
• 1 x 150g Cracked Munich Grain (steeped)
• 2 x 12g Cascade Finishing Hops (steeped / dry hopped)
• 2 x 12g Motueka Finishing Hops (steeped / dry hopped)
• 1 x 10g M44 US West Coast Yeast

Other Ingredients:

• 200g of Dextrose if kegging with no secondary fermentation (not supplied)

Method:

1. Clean / sterilize all equipment including fermenter, paddle, mug and jug (used for steeping)
2. Discard Black Rock Pale Ale Beer Kit tin yeast and sit beer tin along with the Briess CBW Pilsen Light LME container in hot water for 10 minutes
3. Boil 1.25L of water in kettle
4. Steep 150g Cracked Munich Grain in 1L water for 20 minutes
5. Steep 1 x 12g of Cascade and 1 x 12g of Motueka Finishing Hops in 250ml of boiled water for 10 minutes
6. Boil 2L of water in kettle
7. Add 1.5L of boiled water to fermenter
8. Add the Briess CBW Pilsen Light LME along with 250g Light Dried Malt Extract to fermenter and stir to thoroughly dissolve
9. Add contents of Black Rock Pale Ale tin to fermenter and stir thoroughly to dissolve
10. Pour 250ml of boiled water into each of the Briess CBW Pilsen Light LME container and the Black Rock Pale Ale tin. Stir to dissolve remaining contents in both, then add to fermenter
11. Strain 150g of steeped Munich Grain into fermenter (do not add grain to fermenter) and rinse with water
12. Add cold water to fermenter to 22.5 ltrs and test temperature – make sure it is between 18-24 degrees before pitching yeast
13. Take initial hydrometer reading
14. Add steeped 12g Cascade and 12g Motueka Finishing Hops bags and steeped water to fermenter
15. Pitch 10g M44 US West Coast Yeast and stir gently
16. After primary fermentation activity has ceased (check with hydrometer) add both of the remaining 1 x 12g Cascade and 1 x 12g Motueka Finishing Hops bags to the fermenter and gently stir in with sterilized paddle (dry hop). Leave these hops in the fermenter for 72 hours
17. After 72 hours bottle as per normal. If you cannot bottle after 72 hours, remove all of the Cascade and Motueka Finishing Hops bags and bottle within 3 days. Bottle conditioning of 4 weeks is recommended for full flavour to develop

T&C: Please note: Aussie Brewmakers offers free freight on Beer Extract Kits for delivery anywhere in Australia. Please select the ‘Free Shipping’ Freight Option during checkout. The free freight applies only to Beer Extract Kits that are ordered by themselves. In the event additional products are added to the order with a Beer Extract Kit then freight will be applied. If you would like clarification on the free freight structure please contact the team at Aussie Brewmakers.

Please note: Aussie Brewmakers reserves the right to select the freight provider for free freight promotions based off the delivery location and speed of delivery / freight cost.