Cascade Light Recipe Instructions

Ingredients:

• 1 x 1.7kg Black Rock Lager Beer Kit
• 1 x 500g Aussie Brewmakers Light Dried Malt Extract
• 1 x 12g Cascade Finishing Hops teabag (steeped)
• Use yeast supplied with beer kit

 Other Ingredients:

• 200g of Dextrose if kegging with no secondary fermentation or bottle conditioning

Method:

1. Clean / sterilize all equipment including fermenter, paddle, and mug (used for steeping)
2. Remove the yeast under the tin lid and set aside for later. Sit the beer kit tin in hot water for 10 minutes to loosen contents
3. Boil 2ltrs of water in kettle
4. Steep Finishing Hops teabag in 250ml mug of boiled water for 10 minutes
5. Add 1.5L of boiled water to fermenter with Light Dried Malt Extract (add slowly to avoid clumping) then stir vigorously to dissolve
6. Add contents of the beer kit tin to the fermenter and stir to thoroughly dissolve
7. Pour 250ml boiled water into the beer kit tin and stir to dissolve the remaining contents, then add to the fermenter
8. Add Finishing Hops teabag and steeped water to the fermenter
9. Add cold water to the fermenter to 22.5L and test temperature – make sure it is between 14-22 degrees before pitching yeast
10. Take Hydrometer reading and pitch yeast and stir gently
11. When fermentation finished check with hydrometer and bottle as per normal.

N.B. If kegging, add 200g of Dextrose at step 5