Pilsener Schmilsener Recipe Kit – FREE FREIGHT Australia Wide

Description

Pilsener Schmilsener Recipe Kit – FREE FREIGHT Australia Wide

Note:  Please read the conditions/terms located at the bottom of this listing related to the free freight offer for this item prior to purchasing.

This Pilsener Schmilsener recipe kit is an Aussie Brewmakers ‘take’ on a Czech Pilsener style beer. This recipe is another great introduction to experimenting with hops and wet malts for the beginner or ‘tin kit’ brewer.

The name of this recipe came about years ago when a good mate (a.k.a. ‘craft beer boy’) came to visit my bar and was dismayed to find I only had a Pilsener on tap. When a frosty pot was offered the response was ‘Pilsener Schmilsener’ prior to tasting. As it turned out, it is now his favourite beer and is always requested when he visits. Pilsener Schmilsener sort of stuck after that!

Supplied Kit Ingredients:

• 1.7kg Morgan’s Special Kettled Saaz Pilsener Beer Kit
• 1.5kg Coopers Light Malt Extract Tin
• 200g of Dextrose
• 12g Hallertau Finishing Hops – Steeped
• 12g Saaz Finishing Hops – Dray Hopped
• 15g European Lager Yeast
• Other Ingredients:
• 200g of Dextrose if kegging with no secondary fermentation (not supplied)

Method:

1. Clean / sterilize all equipment including wort and paddle
2. Discard Morgan’s Special Kettled Saaz Pilsener tin yeast and sit tin along with the 1.5kg Coopers Light Malt Extract Tin in hot water for 10 minutes
3. Boil 2.0ltrs of water in kettle
4. Add 1.3ltrs of boiled water to wort
5. Steep 12g Hallertau Finishing Hops in 200ml of boiling water for 10 minutes
6. Add both the Morgan’s Special Kettled Saaz Pilsener tin and the 1.5kg Coopers Light Malt Extract Tin and 200g of Dextrose to wort and stir thoroughly to dissolve
7. Pour 250mls of boiled water into each tin and stir then add to wort
8. Add water to wort to 22.5 ltrs and test temperature – make sure it is between 18-24 degrees before pitching yeast
9. Take initial hydrometer reading
10. Add Hallertau Finishing Hops bag and steeped water to wort
11. Pitch 15g European Lager Yeast and stir gently
12. On day 3 of ferment add 12g Saaz Finishing Hops bag to wort (dry hop)
13. When fermentation finished check with hydrometer and bottle as per normal.

N.B. If kegging, add an additional 200g of Dextrose at step 6

T&C: Please note: Aussie Brewmakers offers free freight on Beer Extract Kits for delivery anywhere in Australia. Please select the ‘Free Shipping’ Freight Option during checkout. The free freight applies only to Beer Extract Kits that are ordered by themselves. In the event additional products are added to the order with a Beer Extract Kit then freight will be applied. If you would like clarification on the free freight structure please contact the team at Aussie Brewmakers.

Please note: Aussie Brewmakers reserves the right to select the freight provider for free freight promotions based off the delivery location and speed of delivery / freight cost.