Still Spirits Water Flow Regulator

Description

A steady water flow throughout your distillation greatly increases the quality and consistency of your distillate. This Water Flow Regulator eliminates water pressure fluctuations often found in homes with tank water systems or older flats and houses. This unit will improve performance for all Turbo 500 and reflux stills.

KIT CONTAINS

• Water regulator with pump.
• Tubing
• Tap adaptors for kitchen, garden and laundry taps
• 2 x hose clamps

INSTRUCTIONS

Install the hose supplied with the unit, and attach one end to a tap, using a tap adaptor, and the other end to the back of the unit (tighten the hose clamp). Attach the water inlet hose, provided with your still, to the metal barbed end on the front of the unit.

Turn tap on. Water will fill to the appropriate level inside the Water Flow Regulator and then stop once full. Note: Do not start the pump without filling this correctly first.

Once the water regulator is filled, you can turn on the pump to begin pumping water through your still.

Adjust water flow using the control knob on top of the unit. Refer to your still instructions for appropriate water flow rate.

See full instruction from manufacturer: INSTRUCTION

Read more: here