Duotight 8mm (5/16) Push In to 5/8″ to suit Keg Couplers and Tap Shanks
$3.95
Duotight 8mm (5/16) Push In to 5/8″. This straight joiner is suitable for Beer & Gas hosing with an 8mm outer diameter (4mm & 5mm internal diameter).
27 in stock
Description
Duotight 8mm (5/16) Push In to 5/8″ to suit Keg Couplers and Tap Shanks
This straight joiner is suitable for Beer & Gas hosing with an 8mm outer diameter (4mm & 5mm internal diameter).
The thread on this fitting will suit:
- Standard Keg Couplers with 5/8 thread
- Standard tap shanks with 5/8 thread
- Many other home brew fittings with 5/8 Thread
Please note it will not fit the 9.5mm outer diameter line (6mm internal diameter).
No clamps necessary!
We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi
These push in fittings have been engineered for maximised performance in both gas and liquid applications. Compared to other push in fittings on the market, duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port. No other push ins on the market have EPDM o-rings, let alone two! per push in connection.
What is EPDM?
EPDM = Ethylene Propylene Rubber which has excellent chemical resistance including being compatible with ozone, oils, wide variety of alkaline and acid compounds, water, alcohol, ketone and beverages.
EPDM is also resistant to aging, weather and will not perish easily like other rubber compounds. When compared with silicon and vinyl EPDM has better gas transmission rates, better wear resistance, is BPA free and is the number one choice for many long lasting food grade applications.
Additional information
Weight | 20 g |
---|---|
Dimensions | 50 × 50 × 50 mm |
Unit |
Reviews
There are no reviews yet.